Publication/Accounts Payable Outsourcing: Process, Pricing and the Controls That Matter

Accounts Payable Outsourcing: Process, Pricing and the Controls That Matter

Faizan Kanth
AuthorFaizan Kanth
PublishedMarch 26, 2026
Read Time9 min read
Accounts Payable Outsourcing: Process, Pricing and the Controls That Matter
accounts payable outsourcingAP outsourcinginvoice processingfinance outsourcing IndiaAP controls

Quick answer: Accounts payable outsourcing means a provider runs your invoice-to-pay process, from invoice capture and coding to matching, exception handling, payment run preparation and vendor queries. You keep payment approval, vendor master approvals and policy. It is usually priced per invoice, per full-time equivalent (FTE) or as a mix of both, and it works best when the process is documented and the controls are designed before the first invoice moves.

Accounts payable is a good candidate for outsourcing because it is rules-based, high in volume and easy to measure. It is also where a lot of finance risk sits. Duplicate payments, fraudulent bank detail changes and late fees all happen in AP, so the handover has to be planned around controls as well as cost.

This guide walks through what the provider does, what you should keep, how pricing works and which numbers tell you the arrangement is healthy.

What is accounts payable outsourcing?

It is a service in which an external team processes your supplier invoices inside your finance system, under your policies, and prepares payments for your approval. The team may be shared across clients or dedicated to you. In both cases it works in your ERP or accounting software with its own named logins, so every action is traceable.

AP outsourcing is different from AP automation. Automation is software that captures invoices and routes approvals. Outsourcing is people and process, usually working with whatever automation you already have. Many companies do both: software handles capture and routing, and the outsourced team handles coding, exceptions, vendor contact and reconciliations.

What does the provider do, step by step?

A typical invoice-to-pay scope looks like this:

  1. Invoice capture. Collect invoices from a shared mailbox, portal, EDI feed or scanned post, and log each one so nothing is lost.
  2. Validation. Check that the invoice is addressed to the right entity, carries the required tax details and is not a duplicate.
  3. Coding. Apply general ledger codes, cost centers, tax codes and project codes according to your rules.
  4. Matching. Run two-way or three-way matching against purchase orders and goods receipts.
  5. Exception handling. Chase missing POs, price and quantity mismatches and absent receipts with buyers and suppliers until each is resolved.
  6. Approval routing. Send non-PO invoices to the right approver and follow up on overdue approvals.
  7. Payment run preparation. Build the proposed payment file according to terms, discounts and cash priorities, then submit it for your approval.
  8. Vendor queries. Answer supplier emails and calls about payment status and remittances.
  9. Reconciliations and reporting. Reconcile supplier statements, clear the goods received not invoiced account, support month-end accruals and report KPIs.

Our own invoice processing service follows this sequence, adapted to each client's system and approval matrix.

What should stay in-house?

Outsourcing the work does not mean outsourcing the authority. Keep these with your own finance team:

  • Payment approval and release. The provider prepares the payment file. Someone on your side approves it and releases it at the bank.
  • Approval of vendor master changes. New vendors and changes to bank details should be requested by one party and approved by another.
  • Policy and delegated authority. Approval limits, payment terms, coding rules and exception thresholds are yours to set.
  • Supplier relationships that matter. Strategic suppliers and disputes with commercial weight belong with procurement or finance leadership.
  • Final sign-off on accruals and reconciliations. The provider prepares, your controller reviews.

A short RACI document that lists every AP task with who does it, who reviews it and who approves it removes most later arguments.

Which controls matter most?

Auditors will look at an outsourced AP process the same way they look at an in-house one. These are the controls to design first.

Segregation of duties. Nobody should be able to create a vendor, post an invoice and release a payment. Splitting work between the provider and your team makes this easier than it is in a small in-house department, as long as system roles reflect the split.

Bank detail change verification. Every request to change supplier bank details must be verified by calling the supplier on a number already on file, never the number in the request. This one control stops the most common AP fraud. Decide who makes the call and how it is evidenced.

Duplicate payment checks. Use system duplicate checks on vendor, invoice number, date and amount, plus a periodic report that catches near-duplicates with altered invoice numbers.

Access management. Named user accounts, multi-factor authentication, least-privilege roles and a quarterly access review. Shared logins are a red flag.

Audit trail. Every invoice should show who coded it, who approved it, and when. Exceptions and overrides need a reason code.

Approval limits in the system. Limits enforced by workflow are stronger than limits written in a policy document.

Dependence on one person is a control weakness in its own right. If your current process lives in one clerk's head, the article on AP key person dependency warning signs describes what to look for.

How is accounts payable outsourcing priced?

There are three common models.

  • Per invoice. You pay a fixed fee for each invoice processed. Cost follows volume, which suits seasonal businesses. The fee depends on your volume, the share of PO-backed invoices, invoice formats, languages and how many exceptions you generate. Check what counts as an invoice: credit notes, statements and rejected documents are often billed too.
  • Per FTE. You pay a monthly fee for dedicated staff. This suits complex environments with multiple entities or a lot of judgment, and it gives you a team that learns your suppliers. You carry the utilization risk, so track output per person.
  • Hybrid. A dedicated core team for baseline volume, with per-invoice pricing for peaks or for a defined simple category.

Providers rarely publish per-invoice prices because the drivers vary so much, so get quotes against your own volumes. As a general indicator of labor cost, published estimates put offshore bookkeeping work at about $10-$25 per hour, against $40-$75 per hour for US-based bookkeeping. These are ranges providers publish and they vary by scope and skill level. They are not a quote for AP specifically.

When you compare proposals, ask for the assumptions behind the price: invoices per FTE per day, expected exception rate, hours of coverage and what is included for vendor queries and reconciliations. The cheapest quote often assumes a clean, PO-backed invoice mix you may not have.

Which KPIs should you track?

Agree a small set of measures at the start and review them monthly.

KPIWhat it tells you
Cost per invoiceOverall efficiency, including your own review time
Invoice cycle timeHow long from receipt to ready-for-payment
First-time match rateQuality of purchasing data and PO discipline
Exception rateWhere upstream process problems sit
On-time payment rateSupplier experience and late fee exposure
Duplicate paymentsWhether preventive controls are working

Two cautions. First, several of these depend on your side as much as the provider's. A low first-time match rate usually points to buyers raising POs after the invoice arrives. Second, set a baseline before transition. Without three months of your own numbers you cannot tell whether performance improved.

What does the transition look like?

A sensible transition takes a few weeks to a few months depending on volume and complexity. The phases are consistent.

  1. Discovery. Map the current process, volumes, systems, approval matrix and known problems.
  2. Design. Agree the future process, the RACI, controls, system roles and KPIs.
  3. Knowledge transfer. Record walk-throughs, write standard operating procedures and build a list of supplier-specific rules.
  4. Parallel run. The provider processes a share of invoices while your team checks the output.
  5. Go-live and hypercare. Full volume moves over with daily calls and close monitoring for the first month.
  6. Steady state. Monthly service reviews, quarterly control reviews and a running improvement list.

Tell suppliers about any change to the invoice submission address early, and keep the old mailbox forwarding for several months.

When should you not outsource AP?

It is the wrong moment if any of these apply:

  • You are mid-way through an ERP migration. Stabilize the system first, or build the transition into the migration plan.
  • Volumes are very low. A few hundred invoices a year rarely justifies the setup effort on its own, though it can form part of a wider finance engagement.
  • The process is undocumented and nobody can explain the approval rules. Document first, then move.
  • You expect outsourcing to fix poor purchasing discipline. It will expose the problem, not solve it.

If you are weighing AP as part of a broader finance decision, our guide on when companies should consider outsourcing their accounting functions covers the wider signals.

How SSGSERV handles accounts payable

Our finance and accounting practice is led by ACCA and CPA qualified professionals and delivered from our centers in Bengaluru and Srinagar. AP sits within our AR and AP operations service, which covers invoice processing, payment scheduling, reconciliation, billing, cash application and collections.

  • We work inside your accounting system with named logins and the roles you assign. Payment release and vendor master approval stay with you.
  • Processes run under ISO 9001 quality management and ISO 27001 information security certification, and we hold CMMI Level 3.
  • AP can stand alone or sit alongside general ledger, month-end close and reporting through our accounting and bookkeeping operations, so one team owns the flow from invoice to financial statements.
  • Every engagement starts with a documented process, a RACI and an agreed KPI set, so performance is visible from the first month.

Frequently asked questions

How much does accounts payable outsourcing cost?

It depends on invoice volume, the share of PO-backed invoices, exception rates and the pricing model. Providers quote per invoice, per FTE or a hybrid, and most do not publish rates. Request quotes against your actual volumes and compare the assumptions behind each price, not just the headline number.

Is it safe to outsource accounts payable?

It can be as safe as an in-house process, and sometimes safer, because duties are split between two organizations. Safety depends on design: named system access, payment approval retained by you, verified bank detail changes and a full audit trail. Ask the provider for its security certification and how it evidences each control.

Will the provider make payments on our behalf?

In a well-designed arrangement, no. The provider prepares the payment proposal and supporting documents, and an authorized person in your company approves and releases the payment at the bank. Keeping release in-house preserves segregation of duties.

Do we need AP automation software before outsourcing?

No. An outsourced team can work with manual capture and your existing accounting system. Automation helps with capture and approval routing, and many companies add it later once the process is stable and volumes are clear.

How long does it take to transition accounts payable?

A single-entity process with documented rules can move in a few weeks. Multi-entity, multi-currency environments with heavy exceptions take longer. The parallel run is the step not to skip, because it shows whether the documented process matches what really happens.

Accounts payable outsourcing delivers when the scope, controls and measures are agreed up front. If you would like a second opinion on your current AP process and what a handover could look like, contact our finance team to start the conversation.

Article By
Faizan Kanth

Faizan Kanth founded SSGSERV with a vision to build a scalable global delivery model, connecting Bangalore, one of India's leading technology hubs, with Srinagar, an emerging center for skilled tech talent. Under his leadership, SSGSERV has grown into a specialized operations partner for global technology companies, serving clients across the United States, the Middle East, the United Kingdom, and the Philippines. With over a decade of experience across leading global technology, automotive, and business process organizations, Faizan brings deep expertise in operations management, business strategy, and market evaluation to every engagement. A postgraduate of a premier Indian management institute, he is driven by an entrepreneurial approach to solving complex operational challenges for enterprises worldwide. Beyond building SSGSERV, Faizan is focused on positioning Kashmir as a hub for Global Capability Centers, having grown the company's Srinagar delivery center to over 500 professionals and counting.

Share this story
Back to all insights

Trust & Assurance

Technology Partners

Gartner
Partner
Dell
Partner
Cisco
Partner
HPE
Partner
Clutch
Partner

Governance & Compliance

ISO Certified Operations
[ STATUS: COMPLIANT ]
[ NETWORK: SOVEREIGN ]
[ GOVERNANCE: ENTERPRISE ]